Okay, I only had Phase I plus reeds in my 2000 rig, no probs and 74.4gps loaded..
Modified by reelman at 1:50 PM 2/7/2009
Okay, I only had Phase I plus reeds in my 2000 rig, no probs and 74.4gps loaded..
Modified by reelman at 1:50 PM 2/7/2009
2018 Z19/200 Optimax 2 stroker 24x3 Fury Ultrex 112
Lowrance HDS 12/9 Lives with AT 2
Everything except the heads on my 2.6L 200 Vmax
With gas prices I kinda been scared (for my wallet) to go ahead and make my motor COMPLETE. I do need the heads though.
Modified by Darth VMAX at 10:29 AM 7/24/2008
Edit: I have the 8200 heads now. Waiting on lightweight flywheel
Modified by Darth VMAX at 8:49 AM 2/25/2009
Phase II 225efi on a zx225.
HEY, let's give out the numbers!
Modified by reelman at 1:50 PM 2/7/2009
2018 Z19/200 Optimax 2 stroker 24x3 Fury Ultrex 112
Lowrance HDS 12/9 Lives with AT 2
97 Xpress x70 no JP. 59 mph.Phase2 6 in. setback 28 in. Yamaha 3 blade prop 68 mph. 5300 rpm.Bad chine walk.Killed that prop on a on a rock.Now running a old 25in. with 8in. setback,66mph at 5500rpm. but it is much easier to drive, little chine walk.Plan on sending booth props to mark I think I can get 70mph at 5900rpm. with one of them.This is fun.
Phase 2 on a 175 HPDI. Hangs on an 18.9 Egret carbon/Kevlar flats boat down in Florida. Nathan was a huge help in getting me set up.
Numbers: 59.7 with heavy load (three peeps, 40 gal livewell, heavy cooler) swinging a modded 21P Yammi Pro at 6000. Runs 64 light swinging a 23P Pro@ 5800.
Realized an extra 400 RPM compliments of Hydro-Tec.
Rebel1 who did your mods??? I'm around Lafayette and thinking about mods and who to trust??
2008 Triton 20X2 2008 Mercury Pro 250XS
Phase 3 kit in my 225.
My dealer in Tuscaloosa, AL. did mine. Wayne will tell you if they have a dealer down here in LA or not.
Phase 3, short mid, light weight cowl on a 200 ox66 w/hpdi 1:75 lower adds a little fun to my fishen bote. he he
Hydro Tec rocks
John
Phase 3++
...and responsible for many HT motors storming the waterways across America!
I didn't even get the sticker!
1992 pro-v 200 w/tuner and solid mounts on 1995 gambler intimidator. Spinnin a m-27 5800 rpm 74 mph gps.
2001 GAMBLER 2100 W/2010 250XS
1995 GAMBLER INTIMIDATOR
Phase 2 on a 96 200 small block, 2.6L that Hydtro Tec built . Runs great, but wont push my heavy 196 champion. Anyone got a 3.1L for sale or trade ?
HT has a 99 225 3.1L for sale on their website
"Only Member of the EvoZilla Fishing Team"
(Applications being considered)
------Co-founder of Post Derailment, LLC---------
Will have a post by Feb.... best up to now has been 71gps under perfect conditions with a light load...spec change should be interesting...can't wait.
Modified by reelman at 8:34 AM 1/29/2009
2018 Z19/200 Optimax 2 stroker 24x3 Fury Ultrex 112
Lowrance HDS 12/9 Lives with AT 2
MMM...i just bought a 1989 basshawk with a 92 pro 200 that has been tweeked to run at higher rpms. That's what ive been told and will go 75mph. How can I find out if I got one of those phase kits on the outboard??? Cuz if i don't have at least the phase 1 kit, I would like to have one put on:)
Goin Fishin
Doug T
92 pro v 200 phase 2, ported intake, drilled mid, light weight cowl with 150 graphics.
HEY LET ME KNOW HOW YOUR 92 PRO V PERFORMS!!!
Goin Fishin
Doug T
Will do bro! I should be hittin the water late march early april when the water warms up a bit.