Anybody know a good one or can recommend a good one near Gonzales? Got an 04/05 250 HPDI that ain't running right. It seems as if it's dropping a cylinder at times, but don't know for sure. Motor has been good so far and it's on our bay boat.
Anybody know a good one or can recommend a good one near Gonzales? Got an 04/05 250 HPDI that ain't running right. It seems as if it's dropping a cylinder at times, but don't know for sure. Motor has been good so far and it's on our bay boat.
Call big Mark 571-7671 he is Sushii's kin folk does good work. He is close to you! The only other one I know of is mike at greenwell springs marine
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Kyle35 »</td></tr><tr><td class="quote">Anybody know a good one or can recommend a good one near Gonzales? Got an 04/05 250 HPDI that ain't running right. It seems as if it's dropping a cylinder at times, but don't know for sure. Motor has been good so far and it's on our bay boat. </td></tr></table>
There is one here in Pierre part. Adam Mayon. 985-252-9823. Does real good work.
And if you don't mind traveling, Toledo Freak is a REAL Yam guru. But he's in Lafayette at Gulf Coast Boats.
Alan
__________________________________________________ _________
Free men are not equal. Equal men are not free.
bout time!!thanks alan you always throw a bone my way, it's much appreciated
Bring it to Toledo Freak. Honest, good guy that knows his rice burners!! But don't let him lie to you, he likes them Mercs!! Ask him what sticker he has on his truck!!
Cabelas in Gonzales , Bubba is a helluva Hammer Mechanic . Or Simons outbords on Roddi rd in Gonzales , Casey is the wrench for Simon there and he's as good as anybody around here on a hammer . Both of those places are a great place to bring a hammer , Id call and see which one could get you in quickest and thats where Id go !!!!!!
BassCat-illac
FastCat Fishin Team
If you aint first , your last !!!
All fat girls welcomed !!!!!
Yeah prolly will check compression one day this week after work. Pulled the plugs yesterday and the top one on starboard side was dry and white. I believe that's the #1 cylinder. Usually between me and my dad we fix our boat engine problems, but this one may be more than we want to tackle. Thanks for the recommendations.
Yea, Toledo Freak is the man!! An honest and thorough guy and a pleasure do deal with.
Ronnie
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Alan S »</td></tr><tr><td class="quote">And if you don't mind traveling, Toledo Freak is a REAL Yam guru. But he's in Lafayette at Gulf Coast Boats.</td></tr></table>
Yep he knows his stuff! He has helped me out numerous of times!!
2007 Skeeter 20i class, Yamaha HPDI 250 "If the boat does not rock on your hookset, you are not setting it HARD ENOUGH!!" **Common sense is not common, it is a function of experience and training**
I am done with hpdi,switching to the black side.I need warrenty.
Reply With Quote
just did mine 