21 raker?

[xpresswes]

im looking for a 21p raker to run, trying to find one in good shape to buy.

[DLAB]

Sure you dont need a 19p on that 90? Ill keep my eyes open for ya, come across them every now and then.

[xpresswes]

thats wat im running now is 19p. jus not quite enough

[DLAB]

What Rpms are you getting?

[90xpress]

wesley, i talked with your dad, whenever yall are ready, we can run each others props. I have two. Not sure what pitch, they are some after market props but i am getting 5800 RPMs our of mine.

[xpresswes]

im at 5500rpm right now but the max rpm is suposed to be 5500. and then im runing my jack plate alitle high so wen i kick it down its guna put me at around 5800rpm

[xpresswes]

yea we geten 5500 right now but its 5800 wen im runing the jackplate at the right height

[90xpress]

if you kick it down, i bet it drops the RPMs. I ahve messed with mine enough to know. Yall let me know when yall want to go run em. We can go by the Sugar mill in Thibodaux in the bayou and run

[90xpress]

yeah that sound a little better.<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by xpresswes &raquo;</td></tr><tr><td class="quote">yea we geten 5500 right now but its 5800 wen im runing the jackplate at the right height</td></tr></table>

[xpresswes]

wen we first put our jackplate on we were running 5800 then we raised it up alitle and we droped our rpms down to 5500 and lost speed

[xpresswes]

yea i drop it down half an inch before we go again

[DLAB]

That doesnt make much sense? If you go up with the plate your Rpms should go up, and if your running a 19p at 5500 when you put a 21 on youll be around 5100, You will loose 200RPM per pitch you go up, Id say try a different 19p cause your right where you need to be pitch wise.

[xpresswes]

yea i know, i dont know why my rpms went down wen i raised it up. i think im jus running it to high