New Cowl

[KB337]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Gun Runner &raquo;</td></tr><tr><td class="quote">I dont think he has to worry about hitting it agian , he learned the hard way and it only takes once with the hard way !!!!!!! </td></tr></table>


But he's getting old and will tend to forget.

[Gun Runner]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Bada$$Bullet &raquo;</td></tr><tr><td class="quote">


But he's getting old and will tend to forget. </td></tr></table>Ya , after 40 its all down hill !!!!!!

[250XDC]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Bryan &raquo;</td></tr><tr><td class="quote">Custom paint a picture of your garage door on the front of the motor..Sure way to remind you when backing in to trim down..
I'd put the XS stickers on it</td></tr></table>Damm good idea right there

[SUSHII]

[Cooney]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Gun Runner &raquo;</td></tr><tr><td class="quote">Ya , after 40 its all down hill !!!!!! </td></tr></table>YUP!! and I'm slidding fast!!!

[DOUGMCGEEFTD]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Cooney &raquo;</td></tr><tr><td class="quote">Why are you worried about the hair on my ass, I'm not the YETI!!!!!!!</td></tr></table>

He ain't picky about which azz he kisses :roll

From da droid

[Cooney]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by DOUGMCGEEFTD &raquo;</td></tr><tr><td class="quote">

He ain't picky about which azz he kisses :roll

From da droid</td></tr></table>He must have a very low cull factor

[SUSHII]

I think his standards are high. He seems to be stuck on Bullet owners

[LarryP]

U sure that cowl flows the same amount of air as one from a 250XS? I know the 250XS is differnet from the 300XS. I would ask Don in the 3 liter forum on here.

Leaning her out will not be a good thing.

[Cooney]

That was the first thing I thought of, I flipped them over side by side and the intakes are identical, the outside is different but the inner cowl is the same.

[jeff210]

Good thinking.

[LarryP]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Cooney &raquo;</td></tr><tr><td class="quote">That was the first thing I thought of, I flipped them over side by side and the intakes are identical, the outside is different but the inner cowl is the same.</td></tr></table>
I would still ask. THe 250XS looks identical to the 300XS. The difference is very minor but makes a BIG difference.

[Cooney]

If you look at the Gamble on page 9 of our boats, it's made like his. Also I think Dougs 250xs is made this way also.