Why do Skeeters hop so bad when you turn left?

[SUSHII]

well fill us in what did ya buy

[Gun Runner]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by timmaahh12 &raquo;</TD></TR><TR><TD CLASS="quote">Stock 25M 3 blade....Been wanting to try some others just for shits and giggles but it takes $$$ for that! And i just bought my wife a new car today... </TD></TR></TABLE>Did you buy a car thats hops and slides to ????

[timmaahh12]

I think it's that Chinese Food place in the food court at the mall...and you spelled it wrong, it's China-Wok!

[JOHN202]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jeff210 &raquo;</TD></TR><TR><TD CLASS="quote">What's chine walk mean?</TD></TR></TABLE>

Its what your boat did when you first got it until you learned to drive out of it, you know when it rocks from left to right to the point where you are about to lose control and you gotta back off the gas...

[timmaahh12]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Gun Runner &raquo;</TD></TR><TR><TD CLASS="quote">Did you buy a car thats hops and slides to ???? </TD></TR></TABLE>

Yup...'78 model big body Impala with 24's and hydraulics under it!

Just kidding....We got a 2010 Malibu. It's pretty sharp!

[SUSHII]

should have got her a 84 pinto and got a new boat

[timmaahh12]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KRAMER 21XD &raquo;</TD></TR><TR><TD CLASS="quote">should have got her a 84 pinto and got a new boat </TD></TR></TABLE>

Done tried that....didn't go over so well...Hell I got cut off for a week just for joking about it!!

[BasinDawg]

Zx185? What size jackplate???

[timmaahh12]

TZX190 w/ 150 Vmax....10 or 12...whatever they came stock with.

[SUSHII]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by timmaahh12 &raquo;</TD></TR><TR><TD CLASS="quote">

Done tried that....didn't go over so well...Hell I got cut off for a week just for joking about it!! </TD></TR></TABLE>

[timmaahh12]

Here's the new G-ride...wasn't the one we originally was gonna get but we actually got a better deal on it and it was a step up from the other one. Didn't want the 'chrome' wheels really...

[JOHN202]

Nice car

[SUSHII]

BLING

[BasinDawg]

I will get in touch with friends...Find out about optimum prop/plate settings Sounds like shes close from what I heard in the video...A buddy has a zx185c and the fastest prop after set up was a b/b turbo 4 blade

[BasinDawg]

Nice lookin bowtie

[JOHN202]

TXP 4 blade will work great with a 10 to 12 in plate.

[timmaahh12]

Right on...It'll run 65 with just me and my regular load @ 2-1/4" below at around 5900rpms with about 16-18psi...just fyi

Thanks fellas!!

[BasinDawg]

das what i tink brua

[timmaahh12]

I've heard the same about the turbo props running pretty good on a Skeeter...I'd like to test drive one...

What's the pros and cons to a 4 blade prop? educate me...

[BasinDawg]

3 blades create bow lift where a four blade lift the stern....You can run 4 blades 1/2" higher than a 3 blade on average therefore reducing the drag and increacing the speed...Not on all hulls though definitely most Skeeters
4 blades also offer a better ride and less driver input/fatigue