Changing a trim tab

[qwkdrwmgw]

I have a 90 hp yammie and I went to put a ss prop on and it hits the trim tab. I have a new offset tab coming and was wanting to know how to change it out. Any help would be great.
Thanks Scott
Fish on

[BuzzB8]

Look for a black rubber cap on the top of the lower unit (as you're looking down at the prop from the rear). Remove that cap and unscrew the bolt.

[qwkdrwmgw]

Ok thanks Buzz I'll give it a shot

[secdawgs]

With the hydraulic steering I just ground mine off flat, if you don't have hydraulic steering it could make your boat pull......