Merc Prop on new SHO???

[nhsmallmouth]

Will a merc prop fit on a SHO shaft? Thanks

[tschooler1956]

Might be better off asking this question for a timely reply in the prop section.

[carp_mstr]

Yes a Merc prop such as a Fury will fit on the SHO with the Yamaha hub kit. Yamaha recommends a prop with no vent holes so you may have to plug them on a Merc. prop. Larry Brumley

[21XDC]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by carp_mstr &raquo;</TD></TR><TR><TD CLASS="quote"> Yes a Merc prop such as a Fury will fit on the SHO with the Yamaha hub kit. Yamaha recommends a prop with no vent holes so you may have to plug them on a Merc. prop. Larry Brumley</TD></TR></TABLE>

Hmmmm The Yamaha props they use on the SHO are vented. Most use the T1 V=Max prop... I'd try the fury w/o plugs first. They dont vent hard anyway.

[carp_mstr]

Yamaha has a new VMAX prop for the SHO that is not vented. They used it on the boats that they demoed at the SHO release. Larry Brumley. IT has A different Part Number than the T1.

[Flyswatter]

I just sold my motor and am doing a re-Power with my 25P Fury prop. My dealer has informed me that it should be just fine to use that prop. Also, I should not need plug the vented holes too. Now the wait begins.

[21XDC]

The yamaha gearcases seem to like a larger diameter prop than the 14 in fury. My motor/boat did not like the 27 fury. Keep us posted on the results.