'07 VMAX VZ200TLR Water Pressure

[Texas Larry]

What should I see for water pressure at an idle. My guage shows about 0 at an idle, but I have good tell tale stream, and at WOT showing around 22 psi. Is it most likely just the gauge?

Thanks!!


Modified by Texas Larry at 12:35 PM 10/14/2009

[BuzzB8]

If you don't get the overheat horn, you're probably fine. Mine never moves unless I trim it out a little and put it in gear (moving at idle, it goes to about 4 psi).

[Texas Larry]

Thanks, I appreciate the response!!

[hurricane]

0 at idle.

[Neilslure]

Some gauges dont read real well under 5 PSI, if its not hot and you have good WP at higher speeds, you should be fine.