2004 Yamaha hpdi Vmax 250, Lower Unit Replacement Manual ?????

[mark and ray feltner]

Hey Guy's, This site is the only one i visit and post, so i hope i can get some more help!! I am in process of removing my lower unit for Skeg repair. Doing this myself to save money. SO WHAT I NEED IS, a step by step instruction on removing and installing. I am also going to replace my water pump impeller so any help on this, i would appreciate also. Ill be checking back soon so everyone send me some info.... Thank's

[rangerguy]

Here you go. This is as good as it probably get.

http://www.bbcboards.net/zerothread/289891

[looking4five]

Just the removing, and re-installing the LU is very simple. It can be a pain to get it back together. I would definitely try to have an extra person there to help with that part. There are (4) bolts, and (4) nuts that have to be removed to drop it out.

I put mine in forward gear before dropping it out. This will allow you to turn the prop shaft by just turning the prop. It makes it easier to get the impellar blades angled over the right direction while sliding the impellar housing back down over the impellar.

I have some pics that I will try to post later.

[mark and ray feltner]

Thank's guy's, this ste never fail's!!!!!!!!!! keepem comming......

[mark and ray feltner]

So if anyone else has any tips please fill free to add!!!!!!!!!!Thanks!!!!!!

[mark and ray feltner]

More advice anyone!!!!!!!!!!!