Yamaha HPDI winterizing

[BroncoHorvath]

I always did my own winterizing when I had my OMC's and Merc.

How do you winterize the 250 HPDI?

I don't see the 2 screws on the lower unit, I only see the top one. How do you empty it?

Fogging? do I simply remove the plugs, sprays each hole and turn the engine over?

I already put stabilizer in the gas tanks and turn my gas swith off and ran the engine till it stalled.

I also changed my water seperator filter. Do I have to replace the fuel filter on the engine?

Thanks for the help...

[JUST-IN-TIME]

http://www.switchbait.com/foru...?f=33

the other screw is on the bullet

[Bassbait]

My dealer told me to put the foging oil in the water seperator
and let it run till it starts smoking. Also he said wait till spring
to change the water seperater. Make sure after you put stabil
in run the motor to get it mixed through. The lower unit screw
should be behind the plastic screen on the nose.

[21XDC]

You have to take off the low water pick up screen to get to the bottom drain screw... It's hidden behind the screen.

[BroncoHorvath]

Thanks guys, I really appreciate it... I guess I'll go and do that right now....