Page 1 of 2 12 LastLast
Results 1 to 20 of 24
  1. #1
    STROKEDYAMAHA
    Guest

    111 mph Hydrotec phase III HPDI Hammer PIC




    370hp Hydrotec phase III 3.3l Hpdi ran 111 on the Stroker besides the speed this thing gets some mileage 24 gallons an hour at WOT
    Not to bad for a green motor


    Yamahas 2 motors, the Hydrotec 3.1 phase III its a top performer. Dynos at 340hp its been proven reliable horsepower with speeds at 106 and consistantly busting the 100+ mph barrier with a 2 man going fishing load. This engine is available anywhere sent to hydrotec and modifed to spec at a very resonable price. The extra mods that have been done to my short shafted sportmastered 3.3l Hydrotec Phase III arnt for everyone, it is the best of the best right now....Also any 3.3l Yamaha w Hydrotecs phase 1-3 will bust the 100 mark on a high performance hull. A good stock Yamaha 300 HPDI will bust the 100 mark on a Stroker.
    http://www.hydrotecmarine.com

    Time to change the siggy


    Modified by STROKEDYAMAHA at 4:28 AM 3/20/2008


    Modified by STROKEDYAMAHA at 4:29 AM 3/20/2008

  2. Member
    Join Date
    Sep 2006
    Location
    Calhoun, La.
    Posts
    4,211
    #2

    Re: 111 mph Hydrotec phase III HPDI Hammer (STROKEDYAMAHA)

    4.625 mpg, while running 111 mph???? That's incredible!
    I can't imagine going that fast in a boat!



  3. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,396
    #3

    Re: 111 mph Hydrotec phase III HPDI Hammer (STROKEDYAMAHA)

    You sure know how to tease us slow boat guys.. Thats rock'in... I can't even imagine going that fast.... Be safe Paul.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  4. Blanco Basura Alan S's Avatar
    Join Date
    Feb 2005
    Location
    South Central LA.
    Posts
    33,211
    #4

    Re: 111 mph Hydrotec phase III HPDI Hammer (looking4five)

    Where's the "I HAVE A LARGE BROWN SPOT IN MY PANTS" icon?????

    Alan
    __________________________________________________ _________
    Free men are not equal. Equal men are not free.

  5. Member
    Join Date
    Feb 2007
    Location
    Rose Hill
    Posts
    3,146
    #5

    Re: 111 mph Hydrotec phase III HPDI Hammer (Alan S)

    Ya know, Wayne was talkin to me about goin with a one of those big block HPDI's on my Allison. Maybe I ought to take it down there and let him try it...BUT I AINT DRIVIN IT!! It just makes sense for H/T to keep getting faster

    J/k Paul you got ONE MEAN MOTHER of a basser!

  6. Member
    Join Date
    Apr 2006
    Location
    Youngsville, La
    Posts
    17,686
    #6

    Re: 111 mph Hydrotec phase III HPDI Hammer (Darth VMAX)

    That is SICK!




  7. Member
    Join Date
    Jun 2004
    Location
    Pensacola, FL
    Posts
    1,812
    #7

    Re: 111 mph Hydrotec phase III HPDI Hammer (STROKEDYAMAHA)

    111 mph...wow! Wonder how it would feel if a bee hits your forehead at that speed? Probably more than just a welt!

    What was the factory HP before you modified it? I have a HPDI 250 and would like to modify once the warranty on it runs out -- I kind of want to see if I can break 80 with my Z21, and that's all I'm asking.
    Enjoying Salt Life!
    2020 Ranger Z521LI/Mercury 250 Pro XS

  8. STROKEDYAMAHA
    Guest
    #8

    Re: 111 mph Hydrotec phase III HPDI Hammer (Bassus Maximus)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bassus Maximus &raquo;</TD></TR><TR><TD CLASS="quote">111 mph...wow! Wonder how it would feel if a bee hits your forehead at that speed? Probably more than just a welt!

    What was the factory HP before you modified it? I have a HPDI 250 and would like to modify once the warranty on it runs out -- I kind of want to see if I can break 80 with my Z21, and that's all I'm asking.</TD></TR></TABLE>

    You can start with any 3.3l engine and come out with 350+ prop shaft hp
    you can also modify any 3.1 to 340hp

    I dont think H/T has put one on a Ranger but I have seen a Triton Skeeter and a Champ go way over the 80mph mark with one of there motors

    Give them a call ask for Matt he is a strait shooter and can tell you what to expect

    I would imagine that what ever you get done to it it will make it perform better all around

  9. Member
    Join Date
    Jun 2007
    Location
    spotsylvania
    Posts
    56
    #9

    Re: 111 mph Hydrotec phase III HPDI Hammer (STROKEDYAMAHA)

    If you dont mind me asking, what is the final price on this crazy mod, I see the kit is 32 but how much is everything else,

  10. STROKEDYAMAHA
    Guest
    #10

    Re: 111 mph Hydrotec phase III HPDI Hammer (r1r1)

    H/T can price one out for you
    http://www.hydrotecmarine.com

  11. Member
    Join Date
    Jan 2005
    Location
    Akron
    Posts
    317
    #11

    Re: 111 mph Hydrotec phase III HPDI Hammer (STROKEDYAMAHA)

    Ive always wondered what those guys could do to my 130!!


    BUCKEYE-BASSER

    SKEETER SX176 YAMAHA 130


  12. Member
    Join Date
    Aug 2006
    Location
    Lino Lakes, MN
    Posts
    1,320
    #12

    Re: 111 mph Hydrotec phase III HPDI Hammer PIC (STROKEDYAMAHA)

    111 MPH! My god, any faster and you'll go to plaid...

    2013 Skeeter MX1825 with Yammy F150 & Garmin Ultra 106sv & LVS34 Livescope

    "My hotfoot pedal goes to 11"

  13. Moderator
    Join Date
    Jun 2004
    Location
    Killen, AL
    Posts
    8,565
    #13

    Re: 111 mph Hydrotec phase III HPDI Hammer PIC (skeetzx225)

    And with a trolling motor on the front. Seems like most of the Bullet guys remove those when they want to go fast.
    Jason Phillips

  14. STROKEDYAMAHA
    Guest
    #14

    Re: 111 mph Hydrotec phase III HPDI Hammer PIC (1niceStratos)

    The 111 gps was done with 100lbs of shot 1/2 or better of fuel 2 xtra gallons of oil
    battery charger 3 group 31s and a real 70lb 24 volt trolling motor 2 fishing rods and 3 crankbaits.... the shot could easisally be replaced with tackle and rods...when testing the shot bags make moving around weight alot easier...... I am working on droping 150 lbs of weight off the boat.... and still be a good 1 man fishing load that should help some too

  15. Member
    Join Date
    Jun 2004
    Location
    Birmingham, Alabama
    Posts
    1,000
    #15

    Re: 111 mph Hydrotec phase III HPDI Hammer PIC (STROKEDYAMAHA)

    Nice ride and picture.
    Now thats gettin it.

  16. Member
    Join Date
    Oct 2004
    Location
    Shawnee
    Posts
    50
    #16

    Re: 111 mph Hydrotec phase III HPDI Hammer PIC (LeeinAlabama)

    Wow - now that's fast.

    You may want to wear a helmet with face shield when you're going that fast. If you hit a bug, you could end up with a nasty welt or even in the back of the boat!

    Hank - Shawnee, Ks
    2001 VMax 200 HPDI
    2004 T8 kicker
    2001 Lund Pro-V SE 19.5\'

  17. Member Neilslure's Avatar
    Join Date
    Dec 2005
    Location
    Cary, NC
    Posts
    23,333
    #17

    Re: 111 mph Hydrotec phase III HPDI Hammer PIC (Hank48)

    I saw a Stroker in person for the first time a few weeks ago at a tourny. Looks fast sitting still . Definatly wear a helmet going that fast
    .
    Neil Eckberg- Cary, NC - 2008 Skeeter ZX250- 250 Yamaha SHO

    Kerr Lake Ba$$hole

  18. Member War Eagle1's Avatar
    Join Date
    Jul 2007
    Location
    Junction City, KS
    Posts
    15,737
    #18

    Re: 111 mph Hydrotec phase III HPDI Hammer PIC (STROKEDYAMAHA)

    that's fricken awesome

  19. Member bigfishingstud's Avatar
    Join Date
    Dec 2005
    Location
    Iola ks
    Posts
    67,181
    #19

    Re: 111 mph Hydrotec phase III HPDI Hammer PIC (dragracenova)

    Damn Paul's got her hooked up for sure

  20. Anti Emoticons ChrisH's Avatar
    Join Date
    Jul 2004
    Location
    Indian Springs Village, Al
    Posts
    13,034
    #20

    Re: 111 mph Hydrotec phase III HPDI Hammer PIC (STROKEDYAMAHA)

    i went that fast one time....in an airplane. whenever mine blows im putting it on a truck to MO.


    "Don't be afraid to see what you see."
    Ronald Reagan

Page 1 of 2 12 LastLast

Similar Threads

  1. 2001 HPDI 150 & HydroTec Questions
    By superbon54 in forum Yamaha Motors - High Performance
    Replies: 0
    Last Post: 11-29-2011, 05:26 PM
  2. Hydrotec. . . counter-rotating v-max HPDI 300 gearcase?
    By engineermike in forum Yamaha Motors - High Performance
    Replies: 3
    Last Post: 10-30-2011, 03:56 PM
  3. 200 hpdi phase 1 kit ???
    By dakotahunter12 in forum Yamaha Motors
    Replies: 4
    Last Post: 06-18-2009, 05:28 PM
  4. 05 202 w Hydrotec 250 HPDI is ready for a new home......
    By Todd Morgan in forum Blazer Boats
    Replies: 17
    Last Post: 10-17-2005, 06:46 AM