How do you guys get the yellow stain off the sides of your boat. I don't always wipe it down when I pull it out of the water. I know I should....but I just don't. Am I the only one?
How do you guys get the yellow stain off the sides of your boat. I don't always wipe it down when I pull it out of the water. I know I should....but I just don't. Am I the only one?
I use star-brite hull cleaner then hit it with a little BBS
Z521 Ranger - 250 Pro XS
374V Ranger - 175 Merc Black Max
I've used The Works. It is sold a Wal-Mart. Spray it, scrub it, wax it. If you wipe it down after every trip, and wash it every couple trips it'll stay white and not nearly as hard to keep up with.
I use Bass Boat Saver every time I take it out of the water.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beetle »</TD></TR><TR><TD CLASS="quote">I've used The Works. It is sold a Wal-Mart. Spray it, scrub it, wax it. If you wipe it down after every trip, and wash it every couple trips it'll stay white and not nearly as hard to keep up with.</TD></TR></TABLE>
The Works is the stuff.
Then apply a little Bass Boat Saver and your good for another 10 days on the water.
<')))>< ><((('>
If you use the works, make sure you rinse the boat afterward because you will rust any and every bolt, nut, anything else steel on your boat.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BAIRD »</TD></TR><TR><TD CLASS="quote">If you use the works, make sure you rinse the boat afterward because you will rust any and every bolt, nut, anything else steel on your boat. </TD></TR></TABLE>
Yikes! Guess I won't be using that stuff.
Never had a rust problem. The only area I spray is the hull. Only metal that would get touched would be the motor and there is a sacrificial corrosion anode on the motor.
Reply With Quote
