Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Nov 2004
    Location
    Beavercreek
    Posts
    94

    Lower Unit Bolts Missing?

    I noticed one of the bolts on the lower unit to the motor was loose. I checked the other side and all three were missing. Any idea what the part number of these bolts are so I can replace them? I check the online parts catalog and can't find. Thanks.

  2. Member
    Join Date
    Nov 2004
    Location
    Beavercreek
    Posts
    94
    #2

    Re: Lower Unit Bolts Missing? (Stratos, Ohio)

    I forgot to mention it the bolts are on a 2003 Yamaha 250 EFI OX66.

  3. Member
    Join Date
    Oct 2004
    Location
    Homestead
    Posts
    499
    #3

    Re: Lower Unit Bolts Missing? (Stratos, Ohio)

    The ones that run along the side are p/n 90101-10M70-00 , about $4 each at the dealer. There's also one up under the torque tab anode which is p/n 90119-10M89-00 and its different (a little longer...) than the ones that run along the sides.
    They're suppose to have some Loctite on the threads and be torqued to 48Nm or 35 ft lbs of torque.



    http://www.boats.net/yamaha/pa...55689


    Mike


    Hold My Beer And Watch This !

  4. Member
    Join Date
    Jun 2004
    Location
    Morganfield, KY
    Posts
    1,745
    #4

    Re: Lower Unit Bolts Missing? (Stratos, Ohio)

    Sounds like you need to put a guard dog on your boat. Some one may have been trying to steal your lower unit. Maybe got scared away. I don't know but sounds suspicious.

  5. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,446
    #5

    Re: Lower Unit Bolts Missing? (rockangler)

    I agree... Sounds like someone was trying to steal your LU....

    I have the 4 bolts you need.... I'll sell them to ya for $10.00 shipped... I just bought the stud kit for mine and took mine out. This will help fray the $50.00 cost to me.

    Thanks... Mike mikex19@yahoo.com Let me know, I can get them right out.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

Similar Threads

  1. What's the technique to torque lower unit bolts
    By taeheel2az in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 3
    Last Post: 01-23-2012, 04:15 AM
  2. lower unit bolts breaking 225 proxs
    By Montgomery in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 3
    Last Post: 02-16-2010, 01:59 AM
  3. Lower Unit Bolts
    By StratosDadRI in forum Evinrude/Johnson Motors
    Replies: 8
    Last Post: 05-31-2009, 06:47 PM
  4. Evinrude Lower Unit Bolts
    By ChadASX in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 08-07-2007, 05:51 PM
  5. Torque Specs for Lower Unit Bolts 2000 Vmax 225
    By sarmst100 in forum Yamaha Motors
    Replies: 2
    Last Post: 03-21-2006, 05:19 PM