Results 1 to 16 of 16
  1. #1
    Member DoferGofer's Avatar
    Join Date
    Jun 2004
    Location
    Edgewood Maryland
    Posts
    1,807

    The "Parts Chick"!

    Rusty!

    That storm is looking hectic and as if it might be a little un-directional at the moment when it comes ashore. Take care of "MY" parts chick or I'll have to drive to Tennessee and personally rescue her!




    If you can't run with the big dogs, just stay on the porch.

    Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011

    SST... 14 1/2" x 19" 45.0 mph.@4950
    Rebel 15 1/2" x 17" 45.1 mph.@5250
    Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
    Rebel 15 3/4" x 15" 44.2 mph.@5700-5750

  2. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #2

    Re: The "Parts Chick"! (DoferGofer)

    We will take good care of her......I bet Peetie-Pie would have something to say about that........

  3. Member
    Join Date
    Jun 2004
    Location
    Jacksonville, Al.
    Posts
    3,525
    #3

    Re: The "Parts Chick"! (RUSTY63)

    Dang, thought there was going to be another pic of her.

  4. Member
    Join Date
    Jun 2005
    Location
    Ottawa
    Posts
    449
    #4

    Re: The "Parts Chick"! (damstriper)

    I'll double that dang.

  5. Member toddgot5fish's Avatar
    Join Date
    Aug 2004
    Location
    Warrior, Al.
    Posts
    2,492
    #5

    Re: The "Parts Chick"! (1993392)

    heard she was a mix between Clarkson and Underwood , she neither denied or confirmed those reports.................Reeda ????????????

  6. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,095
    #6

    Re: The "Parts Chick"! (toddgot5fish)

    After having knocked back a few with the parts chick, I'm here ta say she's a MOVIE STAR!!!!!!!!!
    OK Reeda looking fer that 50% parts reduction!!!
    BTW her ole'Man thinks she's the best too!!! Say hey to Michael for me Reeda!!

  7. Member 61Woody's Avatar
    Join Date
    Nov 2004
    Location
    Waterloo,IA.
    Posts
    3,928
    #7

    Re: The "Parts Chick"! (Bassmeister)

    I've never seen any pictures, I don't think she exists
    21 Lund 1775 Impact XS 21 Merc 115 Pro XS

  8. Member DoferGofer's Avatar
    Join Date
    Jun 2004
    Location
    Edgewood Maryland
    Posts
    1,807
    #8

    Re: The "Parts Chick"! (RUSTY63)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUSTY63 &raquo;</TD></TR><TR><TD CLASS="quote">We will take good care of her......I bet Peetie-Pie would have something to say about that........ </TD></TR></TABLE>

    Shhhhhh, hush now. You don't have to tell.
    If you can't run with the big dogs, just stay on the porch.

    Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011

    SST... 14 1/2" x 19" 45.0 mph.@4950
    Rebel 15 1/2" x 17" 45.1 mph.@5250
    Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
    Rebel 15 3/4" x 15" 44.2 mph.@5700-5750

  9. Banned
    Join Date
    Jun 2004
    Location
    Mt Holly/charlotte
    Posts
    10,294
    #9

    Re: The "Parts Chick"! (Hawkeye)

    She does exists, i seen her with my own two eyes!!

  10. Member DoferGofer's Avatar
    Join Date
    Jun 2004
    Location
    Edgewood Maryland
    Posts
    1,807
    #10

    Re: The "Parts Chick"! (nc521vx)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nc521vx &raquo;</TD></TR><TR><TD CLASS="quote">She does exists, i seen her with my own two eyes!! </TD></TR></TABLE>
    Well, I talked to her on the phone and she show do sound purtttttttttty.

    If you can't run with the big dogs, just stay on the porch.

    Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011

    SST... 14 1/2" x 19" 45.0 mph.@4950
    Rebel 15 1/2" x 17" 45.1 mph.@5250
    Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
    Rebel 15 3/4" x 15" 44.2 mph.@5700-5750

  11. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,201
    #11

    Re: The "Parts Chick"! (DoferGofer)

    Ahh she is a sweet girl and cute too! Best of all she knows my voice when I call her, I guess it is my heavy breathing on the other end of the line ! She definatly will mess with you on the phone. Got to remember that she has a watch dog crowd up there that treat her like she is their little girl . And there ain't nothing wrong with that either. Dofer that and a 1/2 glass of ice water would kill you ! CM

  12. Member DoferGofer's Avatar
    Join Date
    Jun 2004
    Location
    Edgewood Maryland
    Posts
    1,807
    #12

    Re: The "Parts Chick"! (ChampioNman)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChampioNman &raquo;</TD></TR><TR><TD CLASS="quote">Ahh she is a sweet girl and cute too! Best of all she knows my voice when I call her, I guess it is my heavy breathing on the other end of the line ! She definatly will mess with you on the phone. Got to remember that she has a watch dog crowd up there that treat her like she is their little girl . And there ain't nothing wrong with that either. Dofer that and a 1/2 glass of ice water would kill you ! CM </TD></TR></TABLE>

    Ha ha ha, just thinking about it, makes me pass out.


    If you can't run with the big dogs, just stay on the porch.

    Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011

    SST... 14 1/2" x 19" 45.0 mph.@4950
    Rebel 15 1/2" x 17" 45.1 mph.@5250
    Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
    Rebel 15 3/4" x 15" 44.2 mph.@5700-5750

  13. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #13

    Re: The "Parts Chick"! (DoferGofer)

    I hope Peetie-Pie doesn't look over your shoulder or you will have lumps on your head....

  14. Moderator Kerry201pro's Avatar
    Join Date
    Jun 2004
    Location
    Decatur, Alabama
    Posts
    4,752
    #14

    Re: The "Parts Chick"! (RUSTY63)

    John, where is the new Riverside logo Reeda said she was working on? Also need some Riverside gear for my regional at the Big O I figured Steve could spare a few bumper stickers
    Kerry Copeland
    2015 Skeeter ZX250/250 SHO
    Decatur, Alabama

  15. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #15

    Re: The "Parts Chick"! (Kerry201pro)

    The Logo is in the works...

    Steve having RM gear or offering it for FREE ?????......

  16. Member DoferGofer's Avatar
    Join Date
    Jun 2004
    Location
    Edgewood Maryland
    Posts
    1,807
    #16

    Re: The "Parts Chick"! (RUSTY63)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUSTY63 &raquo;</TD></TR><TR><TD CLASS="quote">I hope Peetie-Pie doesn't look over your shoulder or you will have lumps on your head.... </TD></TR></TABLE>
    Yup! She would put lumps on there faster than I could grease them.


    If you can't run with the big dogs, just stay on the porch.

    Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011

    SST... 14 1/2" x 19" 45.0 mph.@4950
    Rebel 15 1/2" x 17" 45.1 mph.@5250
    Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
    Rebel 15 3/4" x 15" 44.2 mph.@5700-5750

Similar Threads

  1. where is the parts chick at
    By PII Magnum in forum Kansas Fishing
    Replies: 7
    Last Post: 06-10-2008, 05:05 AM
  2. Our hot parts chick!
    By ChampioNman in forum Evinrude/Johnson Motors
    Replies: 184
    Last Post: 08-23-2007, 12:30 PM
  3. Rusty........Parts Chick.......
    By rayz379 in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 03-28-2007, 04:35 AM
  4. Poem For "The Parts Chick"
    By SEAHORSE in forum Evinrude/Johnson Motors
    Replies: 8
    Last Post: 01-03-2006, 08:14 PM
  5. Rusty & Parts Chick
    By fishinscott in forum Evinrude/Johnson Motors
    Replies: 10
    Last Post: 09-24-2005, 06:13 PM