Grease fittings

[Hoosier fisherman]

Can one of you moderaters tell where the fittings all on the turn tube of
a 94 johnny 200 hp. I've looked all over it and can't find any . Thanks Larry

[RUSTY63]

Flip the trailering bracket down and look at the left side.

[Hoosier fisherman]

Thanks, Rusty. I found it I didn' know that was a trailing bracket
and it flipped down. . You are the man.

[jhnrckr]

Are there any on a 1998 Evinrude Venom 200?

[RUSTY63]

Same one, same place.

[lak100]

Thanks for the question and answer on this. Didnt know about it, but now I can confirm that same grease fitting is on a 94 Evinrude 225. Just got it with the grease gun.
Larry

[RUSTY63]

Glad to Help.

[jhnrckr]

I found that one on the left of my trailering bracket, thanks a bunch. I have two more on my steering cables I grease a couple time per season. Are there anymore grease fittings not related to steering that I am overlooking?

[RUSTY63]

Those are the only three.

[SEAHORSE]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUSTY63 &raquo;</TD></TR><TR><TD CLASS="quote">Those are the only three.</TD></TR></TABLE>


There is also a grease fitting for the shift linkage shaft under the motor cover. look on the stb side, under the carbs thru the cable adjuster area.

There also may be grease fittings on each of the motor cover latches.

[RUSTY63]

Yes there are but the dealer should hit all of them during routine service.

[jhnrckr]

Could you please divuldge the location of these fittings so a do it yourselfer could grease em up?

[RUSTY63]

We will see if we can post a pic that will show you the location.