Does anyone know a quicker way to drain oil filled hubs (on a Triton). There has to be a trick that will help. Thanks in advance.......Dennis S.
Does anyone know a quicker way to drain oil filled hubs (on a Triton). There has to be a trick that will help. Thanks in advance.......Dennis S.
Pop the whole protector off by driving it down with a soft hammer and turning the wheel until it walks off. Each hub holds 6.6 oz
Don't turn the hub to where the hole is perfectly upside down at the 6 o'clock position - it makes it hard for air to enter.
Turn it to where it's at about the 4 o'clock position so air can enter easier. Eventually rotate it to 5, and then eventually 6.
It does take a while, especially when it's cool out!
Reply With Quote