So last week after replacing the springs, I decided to replace a few other bits on the trailer. Yesterday, I rebuilt the trailer coupler, but now I'm a bit concerned over the adjustment. In order for the coupler to fit down over the 2" ball, the bottom bolt had to be loose enough that when unclamped the whole lever unit can turn about 90 deg either way. If it's even 1/4 turn tighter then the coupler will not fit over the ball. This just seems too loose for me. Loose enough that today instead of taking the boat to budd we stayed local. Am I paranoid or does this not sound right to anyone else either. Thx.