Wanna drill some HOLES in your new RUDE L.U. ??

[Hair Jig]

Wow! Gotta wonder about this...

http://www.boatsetup.com/Weedring.html

Might be the appropriate FIX, and you guys may agree, but I don't think I'd do it to mine.

I think this is the same place that the "one can per cylinder" decarb procedure was posted.


Modified by Hair Jig at 5:31 PM 3/2/2005

[Roddy]

I saw this when I was looking at ways to make sure I didn't melt the hub in my new Mazco. I got the torq tab with the big water inlet instead. From the looks of it, it would work, but I don't have big enough kahunas to try it on my motor. I'd gladly try it on yours though.

[MarkNY]

I believe this was a problem on the first Ficht HO's that hit the market. Weed ring meltdown and premature prop hub failure. Drilling that hole helped according to some, however I think Bomb addressed the problem on 2002 and newer motors and it is not necesarry.

[Hair Jig]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RoddyRude &raquo;</TD></TR><TR><TD CLASS="quote">From the looks of it, it would work, but I don't have big enough kahunas to try it on my motor. </TD></TR></TABLE>

Nope. I'm a CHICKEN when it comes to that stuff. If Rude had wanted the holes there, they'd have been there.

[RUSTY63]

That's one way of cooling the prop hub But, that's not the way OMC wanted you to do it.

If you drop the case there is a passage from the torque tab that dumps into the bearing housing area, you just enlarge the passage to 5/16, its on the inside and if you screw it up no one will ever see it.

[Roddy]

Rusty, why didn't you tell me that before I bought a torque tab off you guys?

[RUSTY63]

Because..........Mazco recommends the tab, OMC recommended the drilling to keep the blow out ring from melting if you ran a Renegade.

[Roddy]

[Bassmeister]

UHH Rus....... With tha 27 Gade is there somfin you trying to tell me?????

[RUSTY63]

Nope, not a problem on your motor Mike.

Did you get a package yet?

[Bassmeister]

Not yet Rus looking for Thursday . No problem bud .... I'll be werkin all weekend this un so I'll be lookin at you the next if ok wid you. Darrell wants to come up the 12th if that's ok with you

[RUSTY63]

OK with me, Fred will be here the 20th, if you want to wait....... we can get into some trouble.

[Bassmeister]

Dammit boy I would sure like to see that one, Fred and Darrell would be somefin ta watch!!!

[RUSTY63]

We would most likely have to bail them out of Jail...........

[Bassmeister]

Das a no chiter!!!!!