Easy way to pull wire thru Yo Boat

[HD]

This here helped me pull the Stay-N-Charge wiring thru the back side of my boat to get the wire into the battery compartment. Just a chance, but if you were ever into CB radio's and didn't disguard your 12' whip antenna, simply pull it from the stern towards the bow until it comes out under the console and tape your wires to the end and pull it back. In my opinion and experience it was a whole lot easier than pushing a metal "fish" tape thru there.......Hank

[BuzzB8]

While you're at it, also double-up a long piece of 1/4" nylon rope and pull it through. Cut the doubled-up end in two and leave it hanging under the console and in the bilge area. Now you've got two "pull" ropes for when you need to change that transducer or temp probe.

[BeeNix]

Great ideas