I didnt know where else to put/ask it.
My boat has those lights with a switch on them. I wanted to get some bluewater LEDS, but do they have a switch and can I wire them into the current light? IE remove that light and wire the bluewater in place of them?
I didnt see if they came with a switch on the site. Or would I just leave that light in? The thing is that if I leave that On it WILL drain the battery...Thoughts.
Great questions. Your scenerio is the easiest to configure. You simply splice my lights into your current ones but pull the bulb out of your current fixture. Call me if I can help 800-221-BLUE, if I am not in the office ask Lucy for my mobile number.
Ok Im not at the boat now but one more? What about rough water? Will the 3m hold up?
As long as the surface is clean, you will need a heat gun to remove them.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mike Daleo »</TD></TR><TR><TD CLASS="quote">As long as the surface is clean, you will need a heat gun to remove them.</TD></TR></TABLE> Any military discounts
Are you stationed at Nellis? I was there 91-93, worked at Falcon AMU.
Yup. They just up and moved a viper shop north, they work till like 2-3 hours a day waiting for a "new jet" I will I had made that coin flip
Tonopah? Those guys always had ugly paint jobs anyway.
not that far. There are no vipers. They sit and BS drink coffee and watch TV. There are no jets. They are waitin for the f-35. So I am sure they will be busy, but most of the shop went civie and there are a few AD guys just LOVING life.
Reply With Quote