20" trailer bling

[fishinfoolsonny]

I have seen a couple bass boats and ski boats with big wheel bling on the trailer.
Who sells those or are they car or truck rims modified to fit on a trailer?

[21XDC]

All you need to do is make sure the tire width and diameter are going to be the same. The trailer rinm needs to have "0" offset and center hole big enough to fit your hubs. They are a 4.5 on 5 lug pattern 99% of the time. Trailers have a far less sophisticated suspension and rely alot on the sidewall flex to soften the jars. Putting wheels/tires like this makes for a rougher ride on the hull. Trailer rims are also rated to carry a heavier load than wheels for vehicles. They sure look good though.

[jcabe]

You mean like these....... these are just BOSS wheels made by American Eagle. You may want to check out Britt Meyers website and get his contact info he does quite a few boats around these parts.....www.gofastlookgood.com

[IMG][/IMG]

[fishinfoolsonny]

Those look sweet, but looking at yours I notice how your fenderwell are thinner
if I have to change rims and fenders that would probably be alittle too much. Yours look sweet

[Hydrilla Gear]

That has got to be one of the most annoying web-sites I have EVER been on. Who-ever designed that should be shot

[tat900]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hydrilla &raquo;</TD></TR><TR><TD CLASS="quote">That has got to be one of the most annoying web-sites I have EVER been on. Who-ever designed that should be shot</TD></TR></TABLE>

I thought it was a cool site that took some time to put together Looks like he does some nice custom work

[jcabe]

He does awesome work.......I wish he would start a section for the boats and fishing vehicles for the pros he has done. I know Quinn and Skeet both have Hummers with 30's, Ish has a huge lifted Silverado HD, and Britts F250 is pretty sweet.

[fastman151]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jcabe &raquo;</TD></TR><TR><TD CLASS="quote">You mean like these....... these are just BOSS wheels made by American Eagle. You may want to check out Britt Meyers website and get his contact info he does quite a few boats around these parts.....www.gofastlookgood.com

[IMG][/IMG]</TD></TR></TABLE>

That is one slick looking setup!!!!

[jcabe]

Thanks, I am very proud of it!!! Unfortunately, I had to sell the matching truck with matching rims recently. Wanted to buy a house and something had to go and just couldnt get rid of the boat, lol....

[Hydrilla Gear]

The design of the site is great. What I don't like is the music... Weather I like that kind of music or not it makes it difficult for some to surf the site while at work because I got this music that keeps popping up.... JMO

[THKUSTOMS]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hydrilla &raquo;</TD></TR><TR><TD CLASS="quote">The design of the site is great. What I don't like is the music... Weather I like that kind of music or not it makes it difficult for some to surf the site while at work because I got this music that keeps popping up.... JMO

</TD></TR></TABLE>

So turn your MUTE on.. Or go back to WORK...
YEa he does great work and the rigs hes done are sick..

[thebassoutlaw]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jcabe &raquo;</TD></TR><TR><TD CLASS="quote">You mean like these....... these are just BOSS wheels made by American Eagle. You may want to check out Britt Meyers website and get his contact info he does quite a few boats around these parts.....www.gofastlookgood.com

[IMG][/IMG]</TD></TR></TABLE>Do these tires have the load capacity needed? They sure look good!

[jcabe]

These are a factory option from BassCat and they have tested warrantied them just like their standard rims.