Is it common to have alot of vibration when trimmed down at hard idle or slaving the engine.
Is it common to have alot of vibration when trimmed down at hard idle or slaving the engine.
------Co-founder of Post Derailment, LLC---------
Bill Gard
Richmond, Indiana
2015 BassCat Caracal/225ProXs
TEAM SHERM'S MARINE
Of course I talk to myself...sometimes I need expert advice.
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by TAH »</td></tr><tr><td class="quote">Is it common to have alot of vibration when trimmed down at hard idle or slaving the engine. </td></tr></table>
Yes, this is common (and more pronounced when mounted to an aluminum plate, and/or with "non-even sized" PVS plugs).
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
check the hub insert we have had two or three of the racing fatshaft hubs out of round here lately that caused more than normal vibration
"Luminous beings are we not this crude matter." Yoda
That is what I thought. Thanks for the replys.
Reply With Quote
