I have 2000 Triton TR-21 and i am trying to remove the thru hull fittings.That are used for the pump out. For life of my i can't figure out how they come out. There is a hose clamp right where the fitting is and i can not reach it i had two buddys try they can't their arms in to reach it either. I would like to get these out so i can patch up the gel coat in that area. Any ideas?
http://www.candomarineparts.com/Thruhull.html
Big plastic nut.
BILLY. 1995 202DCX ELITE TEAM FATBOY
& 2000 tracker PT185
2015 Fish count
Days on the Water =5.
Big fish 1-5.5
Big fish 2-5.00000
Big fish 3-4.0
Big fish 4-3.0smallmouth
Big fish 5-@2.50
I understand the concept but how do you get the hose clamp off thats where i am stuck There is no way to get your hand in there with a screwdriver or a socket.
I know on my 191 the barb busted where the hose clamp goes. It was just out of reach of my arms. I put in 2 new ones next to it. If there is a wall in there that you may get to it, may try one of these.
http://www.candomarineparts.com/DeckPlates.html
BILLY. 1995 202DCX ELITE TEAM FATBOY
& 2000 tracker PT185
2015 Fish count
Days on the Water =5.
Big fish 1-5.5
Big fish 2-5.00000
Big fish 3-4.0
Big fish 4-3.0smallmouth
Big fish 5-@2.50
BILLY. 1995 202DCX ELITE TEAM FATBOY
& 2000 tracker PT185
2015 Fish count
Days on the Water =5.
Big fish 1-5.5
Big fish 2-5.00000
Big fish 3-4.0
Big fish 4-3.0smallmouth
Big fish 5-@2.50
Reply With Quote