Non skid rubber

[Shelly Morris]

Does any one know where You can buy the self adhesive non skid rubber,like what is under the trolling motor on a 2008 Stratos!!!!!!

[medicpelle]

http://www.basspro.com/Sure-St...22811

[racefan]

that is not the rubber that is like sand paper. I beleive cabelas has it or just call the boat manufacture and they will sell you some

[KYSkeeter200zx]

check c and o marine great people.

[medicpelle]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by racefan &raquo;</td></tr><tr><td class="quote">that is not the rubber that is like sand paper. I beleive cabelas has it or just call the boat manufacture and they will sell you some </td></tr></table>

Blow the Pic up, there is the sand paper crap and three versions of rubber non slip.

[Shelly Morris]

Thanks for all the replies!!!!!

[racefan]

my bad I did not even see the 4 options to buy. it only shower the sand paper in the first photo

[Dazed66]

http://www.cabelas.com/product...73980

[Shelly Morris]

Dazed66 that,s the one i,m looking for !!!!!!!!!!!!!!!!!
Thanks Shelly

[medicpelle]

Read the reviews

[Carlos H]

Michael, the reviews stopped me from buying it. I will look and see what I can find glue wise from Lowes I guess.

[medicpelle]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Carlos H &raquo;</td></tr><tr><td class="quote">Michael, the reviews stopped me from buying it. I will look and see what I can find glue wise from Lowes I guess.</td></tr></table>

I'm no expert but I think I would go with a waterproof spray adhesive.

[Dazed66]

I just used 3m spray adhesive and it's held fine.

[Carlos H]

Dazed, the stuff in a can? I used that and it did not work that well.

[Ranchdip]

http://www.mcmaster.com

[Dazed66]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Carlos H &raquo;</td></tr><tr><td class="quote">Dazed, the stuff in a can? I used that and it did not work that well.</td></tr></table>

3M 90 spray adhesive, same stuff people use on lid carpeting. Just make sure you prep the surface correctly, used it on my old boat 2 years ago and the nonskid is still stuck to the bow.

[Carlos H]

Roger, I used that stuff and it did not last for me. How do you do the "rolled" corners and get it to stick there?

I cleaned the bottom of the rubber and the stick area with acetone. Are there other prep measures I should take?

[jseasor]

go to google. and check out c & 0 marine parts. they are a board sponsor