Thread: Need some help.

Results 1 to 6 of 6
  1. 11-14-2009, 04:47 AM #1
    bucketmouth4
    bucketmouth4 is offline
    Member bucketmouth4's Avatar
    Join Date
    Sep 2009
    Location
    Cortland, IL
    Posts
    3,229

    Need some help.

    I have a 96 Cajun. My problem is that the cap is coming apart from the hull on the left side of the front. Pretty much only in the area that the trolling motor sits. The right side is still tight. What can I do to fix this. I was thinking about making some shims, and then filling the area with expadable foam. I figured I would ask the experts before doing something stupid.

    Reply With Quote Reply With Quote
  2. bucketmouth4
    bucketmouth4 is offline
    Member bucketmouth4's Avatar
    Join Date
    Sep 2009
    Location
    Cortland, IL
    Posts
    3,229
    #2 11-18-2009, 01:55 PM

    Re: Need some help. (bucketmouth4)

    ttt

    Reply With Quote Reply With Quote
  3. WarEagle24
    WarEagle24 is online now
    Member WarEagle24's Avatar
    Join Date
    Aug 2009
    Location
    Florence, Al.
    Posts
    21,391
    #3 11-18-2009, 04:17 PM

    Re: Need some help. (bucketmouth4)

    Can you post some pictures?


    Reply With Quote Reply With Quote
  4. bucketmouth4
    bucketmouth4 is offline
    Member bucketmouth4's Avatar
    Join Date
    Sep 2009
    Location
    Cortland, IL
    Posts
    3,229
    #4 11-19-2009, 02:08 PM

    Re: Need some help. (wareagle24)

    I will try to get out there in the morning and get some up.

    Reply With Quote Reply With Quote
  5. Rollo331
    Rollo331 is offline
    Moderator
    Join Date
    Jun 2004
    Location
    Miami
    Posts
    9,303
    #5 11-19-2009, 10:06 PM

    Re: Need some help. (bucketmouth4)

    how big is the gap? have you removed the gunnel insert and looked for screws or rivets?
    Reply With Quote Reply With Quote
  6. bucketmouth4
    bucketmouth4 is offline
    Member bucketmouth4's Avatar
    Join Date
    Sep 2009
    Location
    Cortland, IL
    Posts
    3,229
    #6 11-20-2009, 05:37 PM

    Re: Need some help. (Rollo331)

    The gap is like an inch. It looks like the cap is falling over the hull. I can push up on the cap, and it gets tight with the hull again. I have not taken anything apart as of yet. So I have no clue what I'm getting into. Would I be able to see anything if I were to take off the panel where the trollingmotor plug is? Hoping to be able to take a better look at it in the morning.

    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »