1995 Stratos 278DC console seat question.

[skribnod]

Does anyone know if the seat was individual three seats or a bench flip up style? When I purchased the boat the seat had a bench style flip up in it. If it was a three piece type seat, does anyone know where I could locate one for the boat? The seat just doesnt seem right for the boat. Thanks in advance.

[bpberry]

does it have the gas tanks under the seat? If so be careful drilling

[turkdaddy]

[StratosDadRI]

My 1996 Stratos 278 seats after being redone, The center seat backrest it on a double hinge that allows it to fold down to step on and also it pivots up to allow the base to tilt open to get to the center compartment AKA " COOLER"

The bases are screwed in as well as the backrest. I modified mine with some aluiminum stock as i jsut couldnt put a hole through the botton of the backrest and screw then to the boat.

[racefan]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by StratosDadRI &raquo;</TD></TR><TR><TD CLASS="quote">My 1996 Stratos 278 seats after being redone, The center seat backrest it on a double hinge that allows it to fold down to step on and also it pivots up to allow the base to tilt open to get to the center compartment AKA " COOLER"

The bases are screwed in as well as the backrest. I modified mine with some aluiminum stock as i jsut couldnt put a hole through the botton of the backrest and screw then to the boat.


</TD></TR></TABLE>


Those seats look great after the redo. They look factory

[dawgsot7]

can you send me the contact info for who reworked your 95 stratos seats I `have a 96 278v

[StratosDadRI]

Sorry he has retired. He just used the factory pieces as a guide and I picked the colors, It was $800 but I know it could have been done cheaper. I would hight reccomend a BBC sponsor boatseats and you will have 100% new seats for 1/2 the$$$

My friend did the embroidery for free. RS embroidery Attleboro Mass

http://www.boatingseats.com/Bo...e.asp