project boat on ebay

[mefforda]

Would this be worth fixing? Wonder what caused it?

http://cgi.ebay.com/ebaymotors...51468

[Lizard Dragger]

Look like the trailer is in better shape than the boat.

[SwatDawg]

Noway man, that is a sorry built hull... there is hardly any steaks on it.. and look at the pad... I dont see how it can be controlled??

I would not even consider that.... The trailer looks good thou

[Chad2002xrd]

that is a splash of a Shadow bass boat originally. Sold to Glassport in KY I think, still sorry made hulls. Looks like whoever made this one built it like crap too. I wouldnt risk it on that hull.

[ProcraftMike]

I have redone several boats now and I wouldn't touch this one. You are repairing the most critical part of the boat and the area that takes a lot of abuse. I could never ride in this repaired boat, without some fear that isn't going to hold. Not only that, the bottom of the boat must match side for side exactly, or you could end up with a handling nightmare.

[johnsinbelton]

Check this one out.... this is a better project....Its a Ranger 363V....

http://cgi.ebay.com/ebaymotors...37441


DeSean

[Rollo331]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mefforda &raquo;</TD></TR><TR><TD CLASS="quote">Would this be worth fixing? Wonder what caused it?

http://cgi.ebay.com/ebaymotors...51468</TD></TR></TABLE>

no it is a throw away boat...it is delamination the gelcoat if even that has not adhered to the skin coat........it almost looks like house paint rolled on??????
water has got between the paint layer and the skin coat and peeled it off...it is junk unless you need a trailer.............