Need Some Ideas on Interior Fix

[Fat Basser]

The previous owner of my 209 Gambler had the top cap and interior fiberglass sprayed with clear coat. While it looked good, it started to lift in some spots so I actually removed all of it with a product called AquaStrip. Anyway I wet sanded buffed and brought the finish to like new condition.

The problem that I have is that the clear coat in the seating area will not completely come off. I tried re-applying the stripper, scraping, etc etc, so I have patches of bare gel coat and clear coat (doesn't look very good). I am thinking about just re-clear-coating the fiberglass in the seating area. Can I just use the stuff in the can? Any special type?

Any other ideas on what I can do in this area? It's a single console so I have the step area and the port side around the passenger area.

Thanks

Mike

[Rollo331]

Have you tried to use a heat gun? i would try to heat it up pretty good with a heat gun and take a razor blade on the edge and see if it will pop loose.....i would spry it with a gun if you go that way

[Fat Basser]

I was thinking about th...think I'll give it a try.

Mike