FS: ProDucer livescope pole system for Minn Kota Ultrex
Livescope transducer pole system made by The ProDucer for the Minn Kota Ultrex trolling motor. Fiberglass pole is 60 and can be trimmed to fit a 45 or 52 trolling shaft. Trimming is not necessary if you like to positioned the adjustment handle higher. I use this on a 52 trolling shaft even though its designed for a 60.
The mounting plate for the trolling motor head has main 2 placements (left or right side of the trolling motor) and each placement has 3 adjustments (to position the pole). The hole in the fiberglass pole at the bottom by the transducer is for the transducer wire to be fed through. The pole system mounts to the existing trolling motor pre-tapped holes. Will include a separator support with quick release clamp at both end that strap the fiberglass pole to the trolling motor shaft to prevent movement when stowed.
Pole: 60 Handle: 28-45 with ~3 adjustment increments.
More information: https://shut-up-and-fish.com/the-producer-minn-kota-ultrex-60-shaft-trolling-motor-transducer-pole-system-not-f-quest/
A picture of the separator/clamp between the fiberglass pole and trolling motor shaft. This piece holds the fiberglass pole securely and prevents the pole from bounce/wobble when stowed while being transported.
Reply With Quote