This was the prototype fender clip made out of PVC. It was hard to bend straight and was too stiff once formed, but it proved the concept:

bfac233c6fc63af6f24d4850b67a866f9942c594-1.jpg

Here's the finished product, made from kydex. I found it was easier to cut to approximate length and bend one angle at a time. I used a heat gun to warm the kydex up in the area I wanted to bend it:

bfac233c6fc63af6f24d4850b67a866f9942c594-2.jpgbfac233c6fc63af6f24d4850b67a866f9942c594-3.jpg

The bumpers are tied to the kydex and then I finished the other end with a monkey's fist - tying that was actually the hardest part of the whole thing.