Axle Spindle Wear Ring Sleeve Part #?

[natrix19]

Hi,

I lost a bearing this weekend and noticed the wear ring sleeve was grooved, so looking to replace that. How do I find the part number for that ring? I crawled underneath the boat and looking for a part number stamped on the axle and couldn't find anything.

The trailer is for a 2012 Nitro Z8, tandem axle, rear axle has brakes, which is the one that failed.

I was able to find the part numbers for the hubs, bearings, and seals. But not sure how to find the wear ring sleeve.

Hub Part No: Dexter 8-435
Bearings: Inner L68149; Outer L44649
Races: Inner L68111; Outer L44610
Seals: RG06-050

Any help figuring out which wear ring sleeve I need is much appreciated!

[Kingfish3000]

Calling Dexter's parts department is probably in order.

Dexter's parts website leaves a lot to be desired and it is not easy to figure it out and order it yourself.


https://www.dexterpartsonline.com/?g...iAAEgIsQfD_BwE

[ifishinxs]

Mic the enter and outer diameter of the sleeve. Easy to look up that way.

[lmoore]

The seal part number you have there is a 1.72" ID seal, so it's likely a 1.72 OD x 1.68 ID (ish) wear sleeve. Check with a micrometer as mentioned. That's a pretty common size so you'll likely have some options for manufacturer.

[Facemelter]

Couple questions.

Does the wear sleeve have a "lube hole" in it?
Is this a Dexter/vault system?

[ThomasD]

Couple questions.

Does the wear sleeve have a "lube hole" in it?
Is this a Dexter/vault system?

Yes

[natrix19]

Yes it is

[TN Crappie]

May help, may not but over on YT, search for "The TrailerSmith", guy out in TX IIRC. Has numerous videos on trailer repair, how to's, etc., and I saw a video on dealing with the wear collars.

[Macsimus]

May help, may not but over on YT, search for "The TrailerSmith", guy out in TX IIRC. Has numerous videos on trailer repair, how to's, etc., and I saw a video on dealing with the wear collars.

Very good once I figured out that when he says, "Ol", he means "Oy-yul". Thanks for posting.