rdc hull

[rico5555]

I had a RDC. Is the SDC and XRS the same hull?

[davisx]

yes

[bigbass56]

No they are not
Look at the bullet page

[bigbass56]

All 3 are 21’10” the rdc
and the sdc,XRS are different lay out on the inside
the pads are the same

[rico5555]

Thank you that is what I was asking.

[Bullet 250]

Similar but different

[Tim Powell]

The hull is similar, but the layout is different between all 3 models.

Let me know if I can help with a new Bullet - Fastbass Marine.

[rico5555]

Hi Tim, what is the difference between ss and sst

[bigbass56]

The SS has the lay out like the xd,xrd
theSST has the lay out like the XRS

[Tim Powell]

Hi Tim, what is the difference between ss and sst

Hull design is the same, The difference is the top deck layout. The SST layout is similar to the XRS and the SS is what I would call similar to the X boat layout but has the deck lid and drain system as the XRS. The driver console is moved slightly towards the center on the SS/SST. The SS is the faster of the two.

[rico5555]

Thank You.

[Tim Powell]

Thank You.

You're welcome, let me know if you need anything!

[Chad2002xrd]

RDC and SDC have the same hull bottom/pad. The SDC difference, starts at the Beltline as it is slightly wider from there up. Same running surface since 1986 still used today on the 21' 10" models