Hello y'all Thanks for all the good tip and tricks in this threads. I own a Ranger Boat 185VX 2004 and this week I installed a Panthera Recess Tray. I was not able to find any great tip for my specific model. I make a short to help further people. I positioned the opening at 2 3/4'' from the top. The lip of the tray was too big and with a closer opening to the top will have had touching the tray lips to the rubber that hold the carpet in place. Also to cut the floor I used an electric 4'' grinder with a diamond cutting whee. Drill holes at each corners. Use a multitool to remove the foam and have underfloor panel cutting. It is the best mod ever done so far to help my operation of the bow and seating.

enjoy the season

https://youtube.com/shorts/fLgb56xNH...MCmgQzrRvFnmep