Results 1 to 5 of 5
  1. #1
    Member eliteangler's Avatar
    Join Date
    Feb 2008
    Location
    Jones, OK
    Posts
    1,049

    Pump-out hose replacement

    Has anyone replaced the pump-out hose(s) on their Triton TR series boat? Would like to know how to access the hose connection where it exits the side of the boat on the top cap. Thanks in advance!
    Sam Dunaway
    2005 Triton TR-21X
    Powered by Suzuki 250SS

  2. Member
    Join Date
    Jun 2009
    Location
    Mandeville, Louisiana
    Posts
    659
    #2
    Following as well. I cannot reach where the hose exits the top cap. I need to replace the two fittings at the top cap.

  3. Member
    Join Date
    Jul 2018
    Location
    Preston Ct
    Posts
    31
    #3
    I have a 2009 Ranger and my pump out hose broke off where it exits out if the rear
    of the boat. No idea how to access the fitting to attach a new hose?

  4. Member
    Join Date
    Apr 2014
    Location
    SW, Ohio
    Posts
    21,950
    #4
    might have to pull the through fitting and work it backwards to replace it
    2022 z519 cup 225 merc 4s ser # 3B210484. 2--hds12 live units. 2 poles, atlas plate, ghost, hamby's, active target, merc digital gauges
    2002 basscat pantera 3 (dad bought new) sold 8-2-22
    2000 stratos 20 ss (bought new) 200 hp Rude ficht great boat/motor sold 11-21
    pulled by a 2500HD Denali will all the BANKS upgrades
    MAGA 45-47
    ASE/GM Master tech before tools


  5. Member
    Join Date
    Mar 2021
    Location
    Quinton, AL
    Posts
    100
    #5
    I just replaced mine a few weeks back. It wasn't easy. I had to reach as far as I could with 1 hand and a 1/4" wrench to loosen the hose clamp. After I got it loose it came off easy. I just couldn't figure out how to get the old hose out. The old hose goes under the livewell and storage box and then up the side. I just left the old hose in and reran the new hose.
    2008 Triton Tr 21 HP
    2019 Mercury 250 Pro XS 4 Stroke 2B689103
    10" Atlas J.P.
    25p Fury 3 Blade