Just updated my Solix G3 to 5.100. I updated to 5.060 first like it said then put the 5.100 on. My One Boat Network app is telling me I I have an available update for my Solix to 5.060 available? Its saying I have 4.210 installed but the unit itself shows 5.100. Any idea how I can get the one boat app to show correctly? (I also updated the app). Thanks!!
You have to pair the One-Boat Network App with the unit again after the update.
Last edited by SLYDoggie; 03-12-2025 at 11:30 PM. Reason: Typo
---> Regards, Steve Yarbrough (AKA: SLYDoggieTN or SLYFishing on YouTube)
- Apex 19/16/13, Xplore 9, Mega 360, Mega Live 1, and (2) Mega Live 2s
- Minn Kota Ulterra Quest Trolling Motor
- (2) Cannon Optimum Bluetooth Downriggers
- Impulse Lithium Batteries... 36V 60AH for Trolling Motor, (2) 12V 120AH for Cranking & Electronics, & 12V 60AH for Downriggers
ahhh! I knew I was missing something stupid! Thanks much!!
what happened to 5.80 update was that included in the 5.100
Not needed to do 5.100, just need 5.060 before you can do 5.100Originally Posted by pajoe329
Wayne Purdum
Charlottesville, Va.
Helix 12 MEGA SI+ G4N, Helix 15 MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 MEGA SI+ G4N, Ultrex 80/Advanced, MEGA360,
MEGA LIVE, LIVE TL, MEGA LIVE 2, Xplore 10
Been sitting back on updates since boat is still in winter mode , and I', ready to update soon as cover comes off from winter bu anyway will need to update my solix g3 to 5.60 then do I skip and go to 5.100 or do 5.060 5.080 then 5.100 confused again
Do 5.06 and you can skip 5.08 and go right to 5.10. Just did mine this week.
If you read the latest instructions it will point to the previous release and if that release needs a previous version it will tell you. There is no penalty as it will not do the update unless you have done the previous update (or updates). Just back up your waypoints to a chip, just in case. JMO Bob
Tell me where has a slow movin' once quick draw outlaw got to go
thanks guys will do
Reply With Quote