Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Dec 2016
    Location
    NY
    Posts
    20

    Question Removing Tackle Trays from Puma front compartments?

    Has anyone had any experience removing the tackle trays from the 2 front compartments on a Puma next to the net holder?

    I am thinking that some heat from a hair dryer or a heat gun on a low setting will work?

    Not sure of what type of adhesive was use to fasten them down and do not want to damage the bottom of compartments.

  2. Member
    Join Date
    Aug 2016
    Location
    Varnell, GA
    Posts
    7,869
    #2
    A heat gun will soften the adhesive, a heavy braid line can be used to "saw" the adhesive as well. I'm on my 3rd BassCat, the trays have always worked well for me, so I keep them.

  3. Member
    Join Date
    Nov 2019
    Location
    Clare, Michigan
    Posts
    890
    #3
    ^^^^^Heat gun. The adhesive is like a silicone. A little heat at the corners and you can pull it right out.
    2020 BassCat Cougar FTD SP
    2020 250 Pro SX
    #Denalirods #Powerpole
    #PowerhouseLithium
    #Powerpole Move

  4. Member nojretlas's Avatar
    Join Date
    May 2009
    Location
    Turnersville, NJ
    Posts
    2,988
    #4
    Took 5 mins. Then I put rubber in there after.
    IMG_2025-03-08-200855.jpg
    2024 Puma STS
    250 Merc ProXS

  5. Member
    Join Date
    May 2013
    Location
    Newmarket, ON
    Posts
    5,597
    #5
    Factory uses Euroflex adhesive. Use a putty knife but heat up the edges of the knife with a heat gun
    2019 BCB Classic
    Merc V8 200 4S

  6. Member jag9624's Avatar
    Join Date
    May 2011
    Location
    Burlington,NC
    Posts
    817
    #6
    I just pulled mine out with a little force
    Kevin R. Brown
    2022 Bass Cat Puma STS
    250 Mercury Ionic Lithium Batteries
    NBT Marine Garmin Mega 360
    2020 Bass Cat Cougar
    250 Mercury Pro XS 4-Stroke
    1999 Bass Cat Jaguar
    99 Mercury 250efi

  7. Member
    Join Date
    Mar 2015
    Location
    Whiting,nj
    Posts
    312
    #7
    putty knife and a little force mine came right out.

Tags for this Thread