Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Feb 2012
    Location
    Raleigh, NC
    Posts
    416

    Need some help. Trailer

    Embarrassing to admit, but after a long day of fishing and putting the boat away at night, I did not disconnect my emergency brake away cord from my truck, and I pulled off without knowing it. So I知 in a little bit of a pinch because I知 away from home, I need to travel three hours down the road to get back home. My questions: is this something that I can replace easily? And if I知 not able to replace it, can I still drive the trailer without the emergency breakaway cable? I think it has a reset underneath a clip that you just left but not completely sure. Thanks for any help guys, really appreciate it.

  2. Member
    Join Date
    Apr 2018
    Location
    Germantown Wisconsin
    Posts
    1,321
    #2
    Just reset it until you get home. There are instructions on You Tube showing how to run the cable back to stock config.
    A couple years ago some idiot pulled all the brake-away cables at the local launch....mine included.
    It's a pain in the ass to re-thread but you can do it yourself.