Supension upgrade on Marine Master Trailer, Dexter Ez-Flex

[va floater]

I have a 920 also. The trailer axles are 32” center to center. Their website says it will fit a trailer with 33” center to center axles. Do you remember what kit you bought.

[krindgen]

Mine is a 920, the trailer does sit maybe and inch higher. But it wasn't a big deal eliminating the flat Equalizer

I thought you could mess around with the flex equalizer and shackle lengths to get the geometry close. These trailers riding higher could be a good thing. I noticed on mine the spring eyes had contacted the frame.

[Bjxds]

I thought you could mess around with the flex equalizer and shackle lengths to get the geometry close. These trailers riding higher could be a good thing. I noticed on mine the spring eyes had contacted the frame.

Do you have any tire wear, and or do you remember hitting any potholes?

[krindgen]

Do you have any tire wear, and or do you remember hitting any potholes?

No tire wear issues. I put all new Endurance on two seasons ago. I've read about this elsewhere, guys seeing some contact between the spring eyes and frame.

[fishin couillon]

I have the contact on the frame also but its from the great pothole roads of Louisiana......

[riverlizard]

I have a 920 also. The trailer axles are 32” center to center. Their website says it will fit a trailer with 33” center to center axles. Do you remember what kit you bought.

I got the 33" kit. It is 100% worth it

[chad202]

Well did the install. One side the rear leaf spring mount was a pain. The spring was twisted so had to use a big pipe wrench and a jack to untwist to get the bolt in. Everything else was easy. It did increase tire/fender height but I needed more so worked out great. Plan on fishing Monday so will test then.

[riverlizard]

Don't forget to pump a little bit of grease in them every once in a while

[chad202]

Took it for a little cruise today on roads I normally pull my boat on and you can definitely tell it absorbs the bumps better for a softer ride. Well worth the money.

[Jasonrs]

Took it for a little cruise today on roads I normally pull my boat on and you can definitely tell it absorbs the bumps better for a softer ride. Well worth the money.

Thanks for the update!
Just so im clear, you have a marine master trailer with the 32" axle spacing, and the 33" kit with the triangle equalizer works just fine?

[chad202]

Mine measured 33”. My equalizer to leaf spring brackets angle outward. Yours may not. No big deal.

[Jasonrs]

Mine measured 33”. My equalizer to leaf spring brackets angle outward. Yours may not. No big deal.

Thanks!

[chad202]

Just an update after a month of use. Trailer definitely takes bumps better and is super quiet. No squeaks or noises whatsoever.

[fishin couillon]

Have any before/after pics?? Or any pics you can post?

[chad202]

I have pics on my phone but getting them posted I haven't figured out yet. lol

[rgbtr196le]

20240712_073020.jpg20240712_073138.jpg

I updated the trailer suspension for my 920 Elite about a year ago. The Dexter kit in conjunction with the trailer shocks made a world of difference when traveling down undesirable roads. We all spend a lot of money on our boats, and this Dexter kit will be on every future boat trailer that I own. Well worth the money in my opinion.

[fishin couillon]

20240712_073020.jpg20240712_073138.jpg

I updated the trailer suspension for my 920 Elite about a year ago. The Dexter kit in conjunction with the trailer shocks made a world of difference when traveling down undesirable roads. We all spend a lot of money on our boats, and this Dexter kit will be on every future boat trailer that I own. Well worth the money in my opinion.

Being the older eq was "straight" and spring bolt hole being above the mounting hole for the eq., i now see the spring bolt hole is now level with the mounting hole of the eq, did this effect anything, does the trailer now sit higher or lower? Any difference in that???

Here is mine:

[gaston13]

Being the older eq was "straight" and spring bolt hole being above the mounting hole for the eq., i now see the spring bolt hole is now level with the mounting hole of the eq, did this effect anything, does the trailer now sit higher or lower? Any difference in that???

Here is mine:

I have the same link on my 2015 721 trailer. Interested if it would fit and work. What Dexter kit number? Thank You

[rgbtr196le]

The stock equalizer that came on my trailer from Marine Master was not flat like yours. This is probably due to having the 18" wheel with low profile tires. After installing the Dexter kit, my trailer sits the same as it did before.

[fishin couillon]

Ok....gotcha....