Good morning, I just bought a new to me 2019 tracker 190tx with the 115 pro xs four stroke. With a complete stock setup I was running 39-40mph and hitting 6300 rpms. Doing some research a popular prop to help increase performance is the stainless mercury spitfire x7. So I got the 12.7”x 19p. With the motor on the lowest hole (top hole) and the new prop I was able to hit around 45-46 and at about 6000 roms. Most people were recommending to raise the motor to the third whole, as it’s the sweet spot for that motor and prop setup. Brought it to the third hole and I’m barely able to get 46 out of it and only hitting about 5400 - 5500 rpms. Plus at WOT the steering is pretty stiff. Would splitting the difference between the 1st and 3rd mounting hole make a difference? I’m not a fan of the stiff steering, plus I feel like I’m leaving rpm’s on the table. Most people with my setup are getting 48-50 mph and say the handling is great. Any help is appreciated