Hey Blair, do you know where I can find that bracket? I took the bracket off used with the VR-10, which left the bracket that is welded to the axle. My problem is that there is not enough clearance to get the bottom bolt in, the head hits the weld for the spindle. I don’t know how to get around this problem. I found a bracket but it says it is for the
5200-7000 lb (bracket #37110) and I don’t think it will work. Then I found this one below but it talks about a Dexter Titan and bracket p/n [COLOR=rgba(0, 0, 0, 0.85)]
part # T4840900. It looks like it has the caliper mounted horizontally instead of vertically but don’t know why it could not be rotated. Need help figuring this out, please! Thanks
[/COLOR]