Can you recommend a good battery post adapter for lithium batteries? I have 8 wires on my positive post and the nut was almost impossible to get on. I found some from lithiumHub. Is there anything better?
Can you recommend a good battery post adapter for lithium batteries? I have 8 wires on my positive post and the nut was almost impossible to get on. I found some from lithiumHub. Is there anything better?
Look at the ones on drewcrafts website. They are an aluminum plate with 4 studs plus the hole for the battery post. Andy is a great guy to deal with also.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
910-722-0001 call or text
info@drewcraft.com
Tinned copper…..significantly better conductor than aluminum.
However, a better solution is to use a dual terminal block.
Lightning 6
2007 TR-196DC
Nut or bolt? My batteries use a bolt, which is Metric, and a longer one can be used.
second the blue seas. not supposed to use unplated steel or aluminum on a boat. aluminum will create an aluminum oxide ring, especially on the B- post, then youll have a high resistance condition.
there was a pic of one of the lithium hubs aluminum post terminal that the guy thought the studs rusted. hate to say but that wasnt rust but heat from a high resistance connection caused by the aluminum oxide ring.
^^^^^^ plus 100, No aluminum in electrical connections
Thank You Leon Pugh
I have the one from drewcraft and it was perfect! highly recommended
These are really good.
https://a.co/d/cCJpASW
" A Few Good Fish"
Please check out my youtube channel
https://www.youtube.com/channel/UCuuwIthNWDweOTGjtkfOVGw
Interesting looking. I wonder what it is made of. I see no spec’s on the block or hardware denoting quality or material used. My concerns are conductivity and resistance to corrosion. I think I read everything on Amazon and no mention of what it is made of. I wonder how to insulate it but something could be rigged. Much cheaper than the Mercury Block. Anybody with the answers? Thanks Bob
Tell me where has a slow movin' once quick draw outlaw got to go
One of the reviewers for the V-Gate 12 way says it is made out of aluminum.
Just went to the V-Gate site and it says 6061 aluminum on the 20 way.
I still did not find that, but I am pretty sure that is what it is. I am suspicious as the manufacturer would have been bragging if it was copper tinned block or something about marine use. I will put that off for now. Bob
Tell me where has a slow movin' once quick draw outlaw got to go
https://www.vgatemall.com/products-detail/i-32/ About half way down the page they reference 6061 aluminum.
Randy Almeida
2023 Caymas CX21
Mercury Pro XS
I bought mine from Lithium Hub, they work great.
Reply With Quote
.jpg)
