206 set up

[Mikekelly]

I'm working through proping a 08 206 with a 250 hpdi can anyone with this set up let me know what they are running for a prop and what rpm/ speed they are getting I have a hydraulic jack plate with a pro lift adapter Plat that I modified I can run anywhere from 1.75 to 4.5 prop to pad. I can turn a 27t1@ 6200 but have no lift. And bad hole shot 25 furry get good lift and good hole shot but way to many rpm 6700. And the tac is right. Not sure if previous owner had it flashed or disconnected the Rev limiter. Just wondering what other people r turning on these rigs and what performance they are getting

[Rick H]

Can't help much different motor and no hyd. jackplate but I'll give you what I have.

206 w/250XB set at 3.5 below, Worked by Mark Temp+ 26, Semi loaded best 75.2 GPS near red line. Great hole shot I run on the heavy tackle side.

[STLBassBuster]

What ptp did you run the Fury at? Drop the plate to lower rpm and increase bow lift. I have found wide body champions like 4-4 1/2 ptp, in my opinion.

[rid 05 198]

How are you getting those RPM's with a HPDI?