I noticed that one of my Raptor anchors are loose (I can move it side to side). The mounting bracket that attaches to the transom is loose. The bolts that hold the Raptor to the Vexus installed bracket are tight though.
Does anyone know the torque specs for the Vexus installed bracket? If not, I'll just call in the morning. Also, it appears that I need to remove the Raptor in order to get a socket on the bracket bolt. Does the Raptor need to be removed or can I just put a socket on the inside of the transom (assuming I can reach behind the batteries)? I'm assuming that I need to remove the Raptors in order to get a socket on both the outside and the inside of the bracket to get it snugged up.
Any help would be appreciated.
Ryan