Building and Fishing custom jigs
Since 1977
12.9 2006
12.5 1998
Favorite Lakes
Eastman Lake
Hensley Lake
Do you use wire, braid or o rings to tie your skirts? I’ve used bands and didn’t like how the skirts don’t flare out, almost has very limited action in the water especially with swim jigs. I have a hard time getting braid or wire to tighten enough so it doesn’t slip. I thought about trying o rings
Last edited by ECobb91; 04-13-2024 at 08:37 AM.
1995 Ranger 481v
1995 Johnson Fast Strike 175hp
No I tie my skirts with upholstery thread the shirts are followed and cut in half an reversed tab end closed and tied. It creates the skirts to flare. Ive tied the way for over 35 years now.
Building and Fishing custom jigs
Since 1977
12.9 2006
12.5 1998
Favorite Lakes
Eastman Lake
Hensley Lake
Item needed to tie with
full-119797-177336-img_20230326_175044447.jpg
full-119797-177337-img_20230326_182705309.jpg
Pictures of skirts I tie
full-119797-177338-img_20230323_205719060.thumb.jpg.e553ccf26236d0afd3c433aaa2bcf764.jpg
full-119797-177341-facebook_1679629988956_7044878781198531894.thumb.jpg.1fc287c600af4b4a8d2d14d2.jpg
full-119797-177340-facebook_1679630026875_7044878940244885874.thumb.jpg.31c1552fcb4f6c12b241fecf.jpg
full-119797-177349-facebook_1679638507969_7044914512529392143.thumb.jpg.7e0880c6792f0d1a94cf26cb.jpg
full-119797-177346-facebook_1679638438087_7044914219426275209.jpg.b6fe9f7f8145b1c86e650ce6fc9d74.jpg
full-119797-177347-facebook_1679638561667_7044914737755496759.thumb.jpg.4d87b5057bae749d062589d1.jpg
full-119797-177344-facebook_1679638403091_7044914072638972725.thumb.jpg.cc02c26a1eeebe10aacc7a02.jpg
full-119797-177348-facebook_1679638588126_7044914848734598939.thumb.jpg.14730c06d7c2faaa256858c0.jpg
It take about 3 minute to tie the skirts on each bait I tie with weed guards in place and use no glue on the thread to lock the thread inplace glue is not allowed in any of my tying. I also tie many other skirt designs also.
Building and Fishing custom jigs
Since 1977
12.9 2006
12.5 1998
Favorite Lakes
Eastman Lake
Hensley Lake
Here a better look hoe the skirts are tied
full-119797-181896-img_20230504_195550796.jpg
full-119797-181897-img_20230504_195349133.jpg
full-119797-181899-img_20230504_195610991.jpg
full-119797-181898-img_20230504_195512383.jpg
Two tone skirts are built using the same method. Remember you dont need glue to lock the thread inplace after tying the sikirts.
Click on all pictures for clear views
Building and Fishing custom jigs
Since 1977
12.9 2006
12.5 1998
Favorite Lakes
Eastman Lake
Hensley Lake
Like those skirts. I will give that a try. Thanks for the pictures Basshunter67
Get some 26 ga wire and some wire twisting pliers. You can get ti as tight as you want.
https://www.harborfreight.com/6-in-s...ers-57397.html
Here are the tools I use to tie my jigs and bait designs
IMG_20240413_134625216.jpg
IMG_20240413_134655026.jpg
IMG_20240413_134711163.jpg
full-119797-201217-facebook_1697245099766_7118761910934268547.jpg
full-119797-201216-facebook_1697245198411_7118762324678755700.jpg
full-119797-201214-facebook_1697245602702_7118764020398168038.jpg
full-119797-163467-img_20221205_1836139962.jpg
full-119797-163466-img_20221205_204928200.jpg
full-119797-163472-img_20221205_180831217.jpg
full-119797-201072-facebook_1697168586465_7118440990886469606.jpg
full-119797-201073-facebook_1697168496134_7118440612013600220.jpg
full-119797-201076-facebook_1697168608360_7118441082722504385.jpg
full-119797-201077-facebook_1697168629752_7118441172449375074.jpg
full-119797-201079-facebook_1697168719698_7118441549708151728.jpg
Building and Fishing custom jigs
Since 1977
12.9 2006
12.5 1998
Favorite Lakes
Eastman Lake
Hensley Lake
More tied jig and baits two toning bait can be done by using the umbrella hand tied skirt method.
facebook_1713044382578_7185028906025447681.jpg
facebook_1713030999679_7184972774078021844.jpg
facebook_1713044356111_7185028795014409660.jpg
facebook_1713044278335_7185028468798715276.jpg
full-119797-204693-img_20231113_1837132332.jpg
full-119797-204692-img_20231113_1842186952.jpg
Building and Fishing custom jigs
Since 1977
12.9 2006
12.5 1998
Favorite Lakes
Eastman Lake
Hensley Lake
Please don't ask if I sell I am Retired from manufacturing and my PM are shut off and I do not respond to emails.
Building and Fishing custom jigs
Since 1977
12.9 2006
12.5 1998
Favorite Lakes
Eastman Lake
Hensley Lake
Here a step by step on how to tie two tone skirts
First start by folding skirt in half
IMG_20240413_155452723.jpg
IMG_20240413_155503910.jpg
With your index finger and thumb fold the skirt in half wit the other hand take a pair
of scissors and run through the loop skirt pull down and cut. Do same with other skirt tab.
IMG_20240413_155809429.jpg
You will have 4 half tabs
IMG_20240413_155622445.jpg
Then put the jig or what bait you want to tie in the vise hook and weed guard up.
IMG_20240413_155657353.jpg
Then tie thread on neck of collar trim of excess thread then take your first tab and fold it with the close up facing towards the hook.
IMG_20240413_160031591.jpg
Repete on bottom color
IMG_20240413_160031591.jpg
Then add the third tab on top all around
IMG_20240413_160110071.jpg
Then add the same tan to the bottom all around
Then with the tab ends showing you take a razor blade and cut away the excess away from the thread
IMG_20240413_160258824.jpg
IMG_20240413_160350902.jpg
After excess is removed flip over trip skirt end your down
IMG_20240413_160521425.jpg
IMG_20240413_160852529.jpg
When tying each skirt tab make one wrap then one half hitch knot repeat on every layer the three wraps and a couple half hitch then pull tight cut excess thread away. Your done take 3 to 4 minute to tie per jig or what ever bait your tying.
Building and Fishing custom jigs
Since 1977
12.9 2006
12.5 1998
Favorite Lakes
Eastman Lake
Hensley Lake
Thank you so much for the step by step guide, I’ll give it a try tomorrow!
those puff bal jigs look great. Aren’t you the inventor of them?
1995 Ranger 481v
1995 Johnson Fast Strike 175hp
Thanks for taking the time to post the pics and explain your tying techniques. It truly makes a nice looking jig.
Yes I'm the original inventor of both the Puffball jigs 1984/85 and the Lions collar jigs 1986/87
Sorry I dont do videos but I'm not a big you tube fan. I'm more hands on type guy when it come to teaching People on how to tie jigs and other baits.
Last edited by Basshunter67; 04-13-2024 at 09:03 PM.
Building and Fishing custom jigs
Since 1977
12.9 2006
12.5 1998
Favorite Lakes
Eastman Lake
Hensley Lake