Is there a way to add 8 to 10 drops of Premium Plus oil to the air compressor for this engine 1B042770? If there is, how would you suggest to go about this?
Thanks in advance...
Is there a way to add 8 to 10 drops of Premium Plus oil to the air compressor for this engine 1B042770? If there is, how would you suggest to go about this?
Thanks in advance...
Retired 2022...Ranger 2011 Z520, OptiMax 250 1B822149, 8" Bob's Jack-plate, Helix 12si / Helix12di, Duel 12' Talon's, Ultrex 112 i-Pilot Link, Mega 360 and Bravo XS 25.
At ~400 hours had injectors clean and calibrated by INTEGRITY Injection (by European Marine)
I'm not familiar with the 1.5L Optimax, but, there has to be an air inlet for the compressor and that's where you would add PP to it.
_______
Phil
'09 Hewescraft ProV
'09 150 Optimax
due to the horizontal orientation of the air inlet hose it is difficult to drip oil into the compressor
.................................................. ...the scariest thing in life is the unknown ...................................
Thank you guys for your input
Retired 2022...Ranger 2011 Z520, OptiMax 250 1B822149, 8" Bob's Jack-plate, Helix 12si / Helix12di, Duel 12' Talon's, Ultrex 112 i-Pilot Link, Mega 360 and Bravo XS 25.
At ~400 hours had injectors clean and calibrated by INTEGRITY Injection (by European Marine)
I've had decent luck with a small syringe, put just what you need in it, pull back to get a little air and shove it in the fitting with the air/oil all at once. That little compressor is TIGHT!
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Thanks for the additional information
Retired 2022...Ranger 2011 Z520, OptiMax 250 1B822149, 8" Bob's Jack-plate, Helix 12si / Helix12di, Duel 12' Talon's, Ultrex 112 i-Pilot Link, Mega 360 and Bravo XS 25.
At ~400 hours had injectors clean and calibrated by INTEGRITY Injection (by European Marine)