I had a company install my dual Lowrance units on the bow and noticed the screws are coming out and the mount is no longer secure. There is no way to bolt this down. What is the best option to secure this to the deck on a Ranger?
I had a company install my dual Lowrance units on the bow and noticed the screws are coming out and the mount is no longer secure. There is no way to bolt this down. What is the best option to secure this to the deck on a Ranger?
What boat model? Any pics?
Mike
2019 Ranger 520L w/ 250HO ETEC G2
2011 Tracker 175TXW w/ 75HO ETEC
Thicker stainless steel screws. Depending on the mount you may need to increase the hole size with a drill bit, to accept the new screws but that should do the trick for you if you cant bolt down
Wishin I Was Fishin...
Call precision sonar and order the big water fastener kit it comes with drill bit, brass inserts, and screws to mount
This works well, I had a set pull loose. BBT Hood Mount is what I have now, was able to through mount the front three holes on my bow. Another option, run a bolt from the bottom up with a thin nut and tighten up. Use the bolt as a stud, drop your mounting plate over the screws, use a lock nut and tighten up.Originally Posted by Got 5
Reply With Quote
