Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Dec 2020
    Location
    Huntsville, AL
    Posts
    5

    Mounting bow electronics

    I had a company install my dual Lowrance units on the bow and noticed the screws are coming out and the mount is no longer secure. There is no way to bolt this down. What is the best option to secure this to the deck on a Ranger?

  2. Member
    Join Date
    Aug 2015
    Location
    New Bedford,MA
    Posts
    2,814
    #2
    What boat model? Any pics?
    Mike

    2019 Ranger 520L w/ 250HO ETEC G2
    2011 Tracker 175TXW w/ 75HO ETEC

  3. Member
    Join Date
    Apr 2014
    Location
    Burlington, Ontario
    Posts
    392
    #3
    Thicker stainless steel screws. Depending on the mount you may need to increase the hole size with a drill bit, to accept the new screws but that should do the trick for you if you cant bolt down
    Wishin I Was Fishin...

  4. Member
    Join Date
    Jan 2015
    Location
    Southern Illinois
    Posts
    559
    #4
    Call precision sonar and order the big water fastener kit it comes with drill bit, brass inserts, and screws to mount

  5. Member
    Join Date
    Jun 2017
    Location
    Mishawaka, Indiana
    Posts
    926
    #5
    Quote Originally Posted by Got 5 View Post
    Call precision sonar and order the big water fastener kit it comes with drill bit, brass inserts, and screws to mount
    This works well, I had a set pull loose. BBT Hood Mount is what I have now, was able to through mount the front three holes on my bow. Another option, run a bolt from the bottom up with a thin nut and tighten up. Use the bolt as a stud, drop your mounting plate over the screws, use a lock nut and tighten up.

Tags for this Thread