Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    May 2021
    Location
    Clayton,CA
    Posts
    96

    How to test engine under load?

    I have a 1999 200 hp optimax on my year 2000 cobra 201d bass boat and want to test it under load vs just use hose ear muffs and rev it up. Is there a way to load test the engine without having to trailer it to the lake? Thanks

  2. Member
    Join Date
    Jul 2004
    Location
    Penn PA
    Posts
    15,939
    #2
    Yes, with a dynamometer.



  3. Member
    Join Date
    Jul 2023
    Location
    Florida
    Posts
    193
    #3
    I purchased a Dyno about 30 yrs ago. expensive and not as good as using the boat ramp.
    you can modify a prop to allow full rpm at a ramp.

  4. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    98,378
    #4
    If you would, please take a moment to review the Announcements at the top of the Forum, and be sure to provide the Required Info (serial number) when posting. Thanks!

    You can also use the dyno in a test tank, which is pretty slick.

    But it's probably cheaper to go to the ramp.


    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor