Thanks Cid, sounds like good advice, the compre is fairly new, unlike the all star.
What would u use for shims?
I bought some loctite high strength, water resistant 6 minute epoxy today, I hope that will do it.
I took it apart and it is just the reel seat that is the problem, and it is not a seat where the rod is exposed, a shimano bio grip magnumlite, doesn't look or feel like there are any shims, and just not glued right before.
Thanks again.


Modified by yanknbass1 at 8:19 AM 3/22/2010


Modified by yanknbass1 at 12:52 PM 3/22/2010


Modified by yanknbass1 at 12:54 PM 3/22/2010