Just completing break in on my 2023 CX21 pro. Boat is equipped with Mercury 250 4 stroke on a 10" manual z lock jack plate, 24p fury 3 blade, 2 (8' blades), and 4 agm (1 cranking, 3 trolling motor). WOT is around 5850, and while running the boat will only trim to 5.5 on the gage, while idle it will go higher. Will raising the motor allow more rpms, and do the trim numbers seem right? Seen 74mph during break in with not much stuff in the boat, once I loaded my normal tackle and such, boat is still turning the ~5850 rpm on the digital gage and right under 73. Just looking if this sounds right. Love way the boat rides, and fishes just looking to squeeze a little more out of it. Thanks in advance.